Testeur de Telecom FCC partie 68: WF: 9/720, 10/560, 10/160, 2/10 et CEI 61000-4-5, ANSI C62.41, IEC 60950, l'UIT-T K44, le niveau de base : 10 / 700L à N / PE max. 280V, L à N max. 480V. L + N à PE pour les tests ANSI
Spécifications : E-MIG0603FCC
Box 125V bipolar clamping diode parallel 33k to ADAPTER BOX 200E
Box 18V bipolar clamping diode parallel 33k to ADAPTER BOX 200E
Extends the application of the CDN-UTP and CDN-UTP8 to ITU K44 published 2008 see figures A.5.3, A.5.7, A.5.8. clamping ADAPTER BOXES must be ordered separately. Standard accessories ADAPTER BOXES of CDN-UTP und CDN-UTP8 can be used.
Extends the application of the CDN-UTP and CDN-UTP8 to symmetrical interconnetion lines up to 1 Gbit. UTP requires 2 ADAPTER BOXES, 1 input and 1 output UTP8 requires 4 ADAPTER BOXES, 2 input and 2 output
- Réseaux de couplage-découplage pour les essais types foudres 1,2/50µs et ondes 10/700µs jusqu'à 6,6KV sur 2 paires (4 contacts) lignes de communication selon la norme IEC61000-4-5 Edition 3 (Figure 12) and ITU-T K.44.
- Réseaux de couplage-découplage pour les essais types foudres 1,2/50µs et ondes 10/700µs jusqu'à 6,6KV sur 4 paires (8 contacts) lignes de communication selon la norme IEC61000-4-5 Edition 3 (Figure 12) and ITU-T K.44.
Telecom coupling resistors 2x 10E for 10/700µs or 1.2/50µs up to 6kV, ITU-T-K.20, test 7.1. CDN-UTP or CDN-UTP8 can be used for coupling and decoupling.
Telecom coupling module 10/700µs (6kV) coupling 2x 90V GDT//0.1µF, 2x 25E, ITU-T: K.20, K.21, Coupling module can be used also for A-3.4 8/20µs basic current injection.
10/700µs and CWG coupling 2x 90V gas discharge tube and decoupling 20mH, ITU-T K.17.
16x 160 Ohm, 400W resistors for current limiting in accordance with ITU K.44 and ITU K.45. Usable with MIG-ITU-K44 and NW-K44PC. The following values can be arranged with the connecting cables included: 10, 20, 40, 80 and 160 Ohm.
Boitier de protection en plexiglass pour protéger l'opérateur lors des tirs des générateurs.
- Pour des E.S.T. d'une dimension de 30x20x20cm. Isolé pour des essais type onde 1,2/50µs jusqu'à des tensions de 36KV. Equipé d'un contact d'ouverture de porte à relier au système d'interlock du générateur, également inclus les lampes de sécurité verte et rouge.
- Utilisable avec tous les générateurs ayant une sortie sur le dessus du générateur.
Logiciel de contrôle TEMA pour système TRA3000, MIG-OS-MB, MIG ou ESD3000.
(systemTest Manager (TEMA). Chaque générateur nécessite un Entry Code, soit un logiciel TEMA.
- Comfortable control of up to four generators as TRA2000, MIG or ESD3000 system: EUT control, test report, test library. Each serial number requires one "ENTRY CODE = one TEMA Software".)