- Boite de connection HT avec 2 câbles pour l'équipement sous test. Longueur des câbles de 1,5 mètre, un rouge et l'autre jaune équipés avec des clips "alligator" du côté de l'E.S.T..
- Connection box with 2 connection cables to EUT. Cable length 1.5m one red, one yellow, equipped with alligator clips at the EUT side. Personal safety at user own risk.
Small cover boxe usable with generators MIG1803.
The box includes the resistor, equipped with three AMP High Voltage
outputs: Common, R generator and 500 Ohm.
Small cover boxe usable with generators MIG2403.
The box includes the resistor, equipped with three AMP High Voltage
outputs: Common, R generator and 500 Ohm.
Switch Matrix case 19", 2 inputs and 36 outputs for 1.2/50µs up to 6000V and Imax 1000A, a.c. 400V and d.c. 100V.
- Réseau en fonction des demandes clients.
- Cs=40nF, waveform 0.1/2000us. 1 J at 7kV and 1.3 J at 8kV
- Doit être utilisé avec le générateur : MIG1203 STEP
Voltage range up to 10kV in accordance with IEC / EN 60065. Impulse capacitance 1nF. Requires MIG1203 and MIG OPTION STEP.
Voltage range up to 10kV in accordance with IEC / EN 60065 >/= Ed.7: without 4Mohm parallel resistor. Impulse capacitance 1nF. Requires MIG1203 and MIG OPTION STEP.
Network to MIG1803 according to NMI M6 section A.2.19,
waveform 1.2/50µs, 10J at 10kV and 12 kV
Extends the generators MIG7203, MIG9603 or MIG12003 up to 144kV.
MIG14403 requires 6 stages. Extension of; MIG7303 max. 3 stages, MIG9603 max. 2 stages, MIG12003 max. 1 stage. Generator extention must be made at EMCP. Calibration must be ordered separate
Boitier de protection en plexiglass pour protéger l'opérateur lors des tirs des générateurs.
- Pour des E.S.T. d'une dimension de 30x20x20cm. Isolé pour des essais type onde 1,2/50µs jusqu'à des tensions de 36KV. Equipé d'un contact d'ouverture de porte à relier au système d'interlock du générateur, également inclus les lampes de sécurité verte et rouge.
- Utilisable avec tous les générateurs ayant une sortie sur le dessus du générateur.
Logiciel de contrôle TEMA pour système TRA3000, MIG-OS-MB, MIG ou ESD3000.
(systemTest Manager (TEMA). Chaque générateur nécessite un Entry Code, soit un logiciel TEMA.
- Comfortable control of up to four generators as TRA2000, MIG or ESD3000 system: EUT control, test report, test library. Each serial number requires one "ENTRY CODE = one TEMA Software".)